Our Location
304 North Cardinal St.
Dorchester Center, MA 02124

The background IP (background address) that Black Synology starts by default is dynamically assigned (the IP is allocated through the router). Black Synology’s startup time is generally 5-10 minutes. During the startup process, the network card will be disconnected (the…

1. To set up cloud synchronization on Synology NAS, you must first install a program cloud sync, open the DSM package center, search for and install cloud sync. 2. Open cloud sync and you will be asked about the network…

1. Create a storage pool 1. After entering the account password, enter the Synology backend and click the start icon in the upper left corner. 2. Click Disk Manager to enter Disk Management 3. After opening Disk Manager, click HDD/SSD…

In fact, the biggest problem for novices installing ESXi is that there is no integrated network card driver. If your network card happens to be outside the official support range of ESXi, you will be prompted with an error that…

1. Connect the keyboard and power supply to the host. After turning on the computer, press the Del key until you hear a beep, which means you have entered the BIOS.If it doesn’t work, press the F12 key (CTRL+F2 for…

This document takes R740 H740P as an example to introduce the latest PERC card for mixed RAID and NONRAID configuration.1. The array card firmware needs to be updated to 50.5.0.1750 or above. 2. RAID mode does not support hard disk…

The tutorial applies to the reference settings of Snail Star and most public low-power motherboards. Note: Most motherboards should be different but roughly the same. Because the boot program of Synology 3617 3615 has BUG 6.2 (1.04b) and cannot boot…

1. Video tutorial 2. Restart Synology and enter the startup menu 1. Select the fourth item of the startup menu “configure loader” 3. Modify SN MAC1 MAC2 parameters 1. After successful startup, the following menu prompt will appear. 2. Use…

1. Test success cases Baiqun 1821+ GTX-1650 (BY: Brother Chang Zai)Baiqun 1821+ P600 (BY: lin113272349)Baiqun 1819+ T400 (BY: xiong)Virtual Black Group + PVE + 40HX (pass-through/vGPU) + DS3219/DS3221 (BY: Xiuer, Hinata)Virtual black group + ESXi + 2696v4 x2 + GTX1070…

Preface According to a post on the foreign forum xpenology.com: Not all 9th generation CPUs and 10th generation CPUs can enable hardware decoding when installing Synology DS918+ on a physical machine. The main manifestation is: log in to Synology’s SSH…