Synology 7.x whitening method 2: RR boot menu modification

1. Video tutorial

2. Restart Synology and enter the startup menu

1. Select the fourth item of the startup menu “configure loader”

image.png

3. Modify SN MAC1 MAC2 parameters

1. After successful startup, the following menu prompt will appear.

2. Use any computer in the LAN, open the browser and enter Synology IP:7681, for example, mine is 192.168.11.223:7681

2. Select the Set Cmdline option

3. Select the third item Custom SN/MAC

4. Enter SN MAC1 MAC2 and press Enter to confirm.

5. Return to the main menu, select Start, and wait for 3-5 minutes to enter the Synology system.

At present, the MAC address in cmdline is only used for whitewashing and will not be synchronized to the network card. The network card always maintains the original real MAC to prevent some network cards from being unable to DHCP and wake up from the network after modifying the mac, and it will not affect the authentication of official applications.
If you really want to synchronize to the network card (there is no benefit except that it looks consistent), add skip_vender_mac_interfaces=”” to cmdline

At this point, the cleansing has been completed.

Newsletter Updates

Enter your email address below and subscribe to our newsletter